New improvement details
1. The inlet and outlet of the roller can be made into a quick connection method, which is convenient for matching with the circulation and the downstream silo.=
2. Install a slow-flow plate (using a high-temperature resistant PC board) between the feed port and the first and second floors for easy replacement.
3, belt break or slip detection sensor
4. Set the blocking sensor (physical detection) between the feeding port and the second floor, and alarm when the material is blocked.
5. Install a dew point detector between the first and second floors to detect the ambient moisture; when the dew point is below, it can automatically pulse the air (nitrogen or compressed air) and set the spare suction port.
6. Set a mini bag to vacuum the spare dust suction port to prevent material waste.
Other highlights
1. Check the window and turn on the 4 drive motors of the machine to stop working.
2. After the belt is broken, it can be handled by alarm.
3. The inside can be made into a micro positive pressure, and the moisture of the high nickel material can be better controlled by adding a dry gas or the like.
Equipment expertise
This is a specially designed roll crusher applicable to the use for less metal contaminant requirement.For avoiding feed jams at roller gap, alumina- ·made roller surface has grooves ,assisting the fedmaterial press into the roller gap.